Designed for ease-of-use, mobility, high-volume performance and versatility! 3 shredders to choose from depending on the level of security required.
Safe – has a locking master switch, reverse function, auto-off if waste bin is opened and thermo-sensor motor protection
Designed for easy operation with a conveyor belt feed system, 17″ wide feed opening, easy to use/understand controls and an automatic anti-jam function
Depending on shredder – cutting speed is up to 55-60 ft. per minute
Easy to see lights for – “power on”, “paper jam” and “bin door open”
Two switched for power – one On/Off with locking key and one with Off and Forward or Reverse function
Idling sound level approximately 68 dBA
Bin full warning with Auto-Stop
Bin door on right side – optional left side retro-fit kit available
53 gallon capacity waste bin – optional baler available
Optional accessories include; feed table expander, emergency front stop bar, waste door hinge kit and baler
SPECIFICATIONS:
Electrical: 220 V, 60Hz, three phase power supply required
Designed for ease-of-use, mobility, high-volume performance and versatility! 3 shredders to choose from depending on the level of security required.
Safe – has a locking master switch, reverse function, auto-off if waste bin is opened and thermo-sensor motor protection
Designed for easy operation with a conveyor belt feed system, 17″ wide feed opening, easy to use/understand controls and an automatic anti-jam function
Depending on shredder – cutting speed is up to 55-60 ft. per minute
Easy to see lights for – “power on”, “paper jam” and “bin door open”
Two switched for power – one On/Off with locking key and one with Off and Forward or Reverse function
Idling sound level approximately 68 dBA
Bin full warning with Auto-Stop
Bin door on right side – optional left side retro-fit kit available
53 gallon capacity waste bin – optional baler available
Optional accessories include; feed table expander, emergency front stop bar, waste door hinge kit and baler
SPECIFICATIONS:
Electrical: 220 V, 60Hz, three phase power supply required
The Heavy Duty Industrial Series consists of the AMS-5000, AMS-6000, AMS-7500, and AMS-10000. These models ranging from fifty to one-hundred horsepower, will realistically shred three to six tons of material per hour. If twenty-five to fifty tons per shift is your problem, then one of our Heavy Duty Industrial models is your solution.
Perfect for large shredding facilities
Capacities of 3 – 6 tons per hour
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Metal detection system optional
Lift off panels for easy maintenance
Spur gears running in an oil bath
Automatic shut down if jam occurs
Central point lubrication
30″ wide, independently powered input conveyor
A perfect fit for our AMS-2
Security recycling system
Precision ground, A-2 tool steel cutters with positive a saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, microfiche, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
The Heavy Duty Industrial Series consists of the AMS-5000, AMS-6000, AMS-7500, and AMS-10000. These models ranging from fifty to one-hundred horsepower, will realistically shred three to six tons of material per hour. If twenty-five to fifty tons per shift is your problem, then one of our Heavy Duty Industrial models is your solution.
Perfect for large shredding facilities
Capacities of 3 – 6 tons per hour
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Metal detection system optional
Lift off panels for easy maintenance
Spur gears running in an oil bath
Automatic shut down if jam occurs
Central point lubrication
30″ wide, independently powered input conveyor
A perfect fit for our AMS-2
Security recycling system
Precision ground, A-2 tool steel cutters with positive a saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, microfiche, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
The Heavy Duty Industrial Series consists of the AMS-5000, AMS-6000, AMS-7500, and AMS-10000. These models ranging from fifty to one-hundred horsepower, will realistically shred three to six tons of material per hour. If twenty-five to fifty tons per shift is your problem, then one of our Heavy Duty Industrial models is your solution.
Perfect for large shredding facilities
Capacities of 3 – 6 tons per hour
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Metal detection system optional
Lift off panels for easy maintenance
Spur gears running in an oil bath
Automatic shut down if jam occurs
Central point lubrication
30″ wide, independently powered input conveyor
A perfect fit for our AMS-2
Security recycling system
Precision ground, A-2 tool steel cutters with positive a saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, microfiche, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
The Heavy Duty Industrial Series consists of the AMS-5000, AMS-6000, AMS-7500, and AMS-10000. These models ranging from fifty to one-hundred horsepower, will realistically shred three to six tons of material per hour. If twenty-five to fifty tons per shift is your problem, then one of our Heavy Duty Industrial models is your solution.
Perfect for large shredding facilities
Capacities of 3 – 6 tons per hour
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Metal detection system optional
Lift off panels for easy maintenance
Spur gears running in an oil bath
Automatic shut down if jam occurs
Central point lubrication
30″ wide, independently powered input conveyor
A perfect fit for our AMS-2
Security recycling system
Precision ground, A-2 tool steel cutters with positive a saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, microfiche, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
The Medium Duty Industrial series shredders, with their twenty inch wide input conveyor, consists of the AMS-1500, AMS-2000, AMS-2500, AMS-3000, and AMS-4000 models. Using ten and three-quarter inch diameter cutters, these models range from fifteen to forty horsepower and will realistically shred one to three tons of material per hour. The Medium Duty Industrial’s quality engineering, design, and manufacturing add up to a tons per day ability that is unsurpassed in the industry.
“The AMS 4000 is an extremely powerful unit and has allowed us to increase our volume of shredding.” – Michael Lewter, Director of Operations, Carolina Records & Information Management
Capacities 1 – 3 tons per hour
Rugged, dependable shredders on heavy castors
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Paddle wheel crusher
Lift off panels for easy maintenance
Automatic shut down if jam occurs
Central point lubrication
Optional attached output conveyors
Security recycling system
Precision ground, A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
Heat treated spur gears with a full 4-1/2″ face provide effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
The Medium Duty Industrial series shredders, with their twenty inch wide input conveyor, consists of the AMS-1500, AMS-2000, AMS-2500, AMS-3000, and AMS-4000 models. Using ten and three-quarter inch diameter cutters, these models range from fifteen to forty horsepower and will realistically shred one to three tons of material per hour. The Medium Duty Industrial’s quality engineering, design, and manufacturing add up to a tons per day ability that is unsurpassed in the industry.
“The AMS 4000 is an extremely powerful unit and has allowed us to increase our volume of shredding.” – Michael Lewter, Director of Operations, Carolina Records & Information Management
Capacities 1 – 3 tons per hour
Rugged, dependable shredders on heavy castors
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Paddle wheel crusher
Lift off panels for easy maintenance
Automatic shut down if jam occurs
Central point lubrication
Optional attached output conveyors
Security recycling system
Precision ground, A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
Heat treated spur gears with a full 4-1/2″ face provide effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
The Medium Duty Industrial series shredders, with their twenty inch wide input conveyor, consists of the AMS-1500, AMS-2000, AMS-2500, AMS-3000, and AMS-4000 models. Using ten and three-quarter inch diameter cutters, these models range from fifteen to forty horsepower and will realistically shred one to three tons of material per hour. The Medium Duty Industrial’s quality engineering, design, and manufacturing add up to a tons per day ability that is unsurpassed in the industry.
“The AMS 4000 is an extremely powerful unit and has allowed us to increase our volume of shredding.” – Michael Lewter, Director of Operations, Carolina Records & Information Management
Capacities 1 – 3 tons per hour
Rugged, dependable shredders on heavy castors
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Paddle wheel crusher
Lift off panels for easy maintenance
Automatic shut down if jam occurs
Central point lubrication
Optional attached output conveyors
Security recycling system
Precision ground, A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
Heat treated spur gears with a full 4-1/2″ face provide effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
The Medium Duty Industrial series shredders, with their twenty inch wide input conveyor, consists of the AMS-1500, AMS-2000, AMS-2500, AMS-3000, and AMS-4000 models. Using ten and three-quarter inch diameter cutters, these models range from fifteen to forty horsepower and will realistically shred one to three tons of material per hour. The Medium Duty Industrial’s quality engineering, design, and manufacturing add up to a tons per day ability that is unsurpassed in the industry.
“The AMS 4000 is an extremely powerful unit and has allowed us to increase our volume of shredding.” – Michael Lewter, Director of Operations, Carolina Records & Information Management
Capacities 1 – 3 tons per hour
Rugged, dependable shredders on heavy castors
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Paddle wheel crusher
Lift off panels for easy maintenance
Automatic shut down if jam occurs
Central point lubrication
Optional attached output conveyors
Security recycling system
Precision ground, A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
Heat treated spur gears with a full 4-1/2″ face provide effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
The Medium Duty Industrial series shredders, with their twenty inch wide input conveyor, consists of the AMS-1500, AMS-2000, AMS-2500, AMS-3000, and AMS-4000 models. Using ten and three-quarter inch diameter cutters, these models range from fifteen to forty horsepower and will realistically shred one to three tons of material per hour. The Medium Duty Industrial’s quality engineering, design, and manufacturing add up to a tons per day ability that is unsurpassed in the industry.
“The AMS 4000 is an extremely powerful unit and has allowed us to increase our volume of shredding.” – Michael Lewter, Director of Operations, Carolina Records & Information Management
Capacities 1 – 3 tons per hour
Rugged, dependable shredders on heavy castors
Extra large feed tables at no extra charge
Low voltage, key locked, easy access controls
Paddle wheel crusher
Lift off panels for easy maintenance
Automatic shut down if jam occurs
Central point lubrication
Optional attached output conveyors
Security recycling system
Precision ground, A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, etc. An optional automatic cutter head lubrication system is available.
Aluminum bronze wear pads keep the cutters from riding into the side plates of the shredder and can be field adjusted to maintain tolerances and maximize shredding.
Heat treated spur gears with a full 4-1/2″ face provide effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
Ameri-Shred offers its AMS-1000 and AMS 1500 Conveyor-Fed Industrial Paper Shredder with the standard 10 hp or 15 hp upgrade. These units have features of our larger series in a compact design. These powerful units are designed for high volume, centralized shredding and mobile document destruction. Both shredders can be matched to balers, both horizontal and downstroke.
“Our company purchased a AMS-1000 and are very pleased with it’s performance.” – Frank Reed, Operations Manager, Puliz Records Management Services.
Rugged, dependable shredders on heavy castors
Extra large feed tables
Low voltage, key locked, easy access controls
Automatic shut down if jam occurs
Optional attached output conveyors
One year warranty
Security recycling system
Precision ground, 7″ diameter A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, etc.
An optional automatic cutter head lubrication system is available.
Heat treated spur gears provide an effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
Ameri-Shred offers its AMS-1000 and AMS 1500 Conveyor-Fed Industrial Paper Shredder with the standard 10 hp or 15 hp upgrade. These units have features of our larger series in a compact design. These powerful units are designed for high volume, centralized shredding and mobile document destruction. Both shredders can be matched to balers, both horizontal and downstroke.
“Our company purchased a AMS-1000 and are very pleased with it’s performance.” – Frank Reed, Operations Manager, Puliz Records Management Services.
Rugged, dependable shredders on heavy castors
Extra large feed tables
Low voltage, key locked, easy access controls
Automatic shut down if jam occurs
Optional attached output conveyors
One year warranty
Security recycling system
Precision ground, 7″ diameter A-2 tool steel cutters with a positive saw-tooth grip will shred not only paper but corrugated boxes, credit cards, transparencies, microfilm, etc.
An optional automatic cutter head lubrication system is available.
Heat treated spur gears provide an effective transfer of power to the cutters.
Oil bath lubrication eliminates the need for manual greasing.
A paddle wheel crusher, located just ahead of the cutters, enables these versatile machines to crush and shred wastebasket contents, corrugated boxes, etc.
Turn old boxes, newsprint or computer printouts into economical packaging material for FREE! The special PacMate technique converts empty corrugated boxes, newsprint or computer printouts (non-confidential) into large volume void fill material or cushioned packing mats suitable for packing even sensitive goods for transport. The PacMate incorporates the same economical and reliable traits of the larger PacMaster.
Allows the user to utilize newsprint and computer printouts (non-confidential) for their packing material needs
Table top convenience, makes it easy to move from location to location
Designed for ease-of-use, mobility, high-volume performance and versatility! 3 shredders to choose from depending on the level of security required. Safe – has a locking master switch, reverse function, auto-off if waste bin is opened and thermo-sensor motor protection
The standard version: Data shredder with integrated mobile container for shredded material. Wherever there is a need for shredding large quantities of expired/sensitive data, in strict compliance with data security practices, then it is more economical to do this at one “central” location. The extensive Intimus selection of large shredders perfectly combines the performance and security requirements, guaranteeing an investment with an excellent price/performance equation.
SPECIFICATIONS:
Electrical: 220 V, three phase power supply required
The standard version: Data shredder with integrated mobile container for shredded material. Wherever there is a need for shredding large quantities of expired/sensitive data, in strict compliance with data security practices, then it is more economical to do this at one “central” location. The extensive Intimus selection of large shredders perfectly combines the performance and security requirements, guaranteeing an investment with an excellent price/performance equation.
SPECIFICATIONS:
Electrical: 220 V, three phase power supply required
The standard version: Data shredder with integrated mobile container for shredded material. Wherever there is a need for shredding large quantities of expired/sensitive data, in strict compliance with data security practices, then it is more economical to do this at one “central” location. The extensive Intimus selection of large shredders perfectly combines the performance and security requirements, guaranteeing an investment with an excellent price/performance equation.
SPECIFICATIONS:
Electrical: 220 V, three phase power supply required
